How to make a wooden engagement ring

The Sport Book says you can buy a wooden ring from a craftsman. 

It’s not for sale at this time, but it might be a few years off. 

Wooden rings are not for the faint-hearted. 

They’re heavy, they take a lot of care, and they can be very expensive. 

I think I’ll stick with metal rings.

They’re the cheapest and the most practical way to decorate your ring. 

The more complicated the ring, the better, but that’s just me. 

For the most part, you’re going to want to find something that is fairly durable and that will be easy to clean. 

Here are a few basic methods you can use to make your own wooden rings. 

These are the basics you’ll need to know to make them. 

Use the smallest diameter ring that you can get your hands on. 

You can use a ring from any store that has a larger diameter than the ring that it is made for. 

Find the ring in the same size you would any other ring.

The longer you can go without damaging the ring with a drill, the more likely you are to make it. 

In my experience, I have been able to drill holes that are exactly 2.5 inches long. 

If you can’t find that, just use a 1.5-inch drill. 

To make a thicker ring, use a smaller diameter ring.

You can drill through a ring that is a half an inch thick, or a quarter an inch. 

This method is for people who want to make rings that are a little bit more durable. 

Make a small hole in the ring.

This will give you a smaller piece of metal that will help it stay in place and protect the ring from the elements. 

Fill the ring to the top of the ring by cutting it in half.

This is the easiest way to make the ring thinner, and is especially useful for children. 

Cut a small slit in the end of the diameter ring to make space for the metal to rest. 

Slip a hole through the slit in order to create a hole in each half of the rings.

I use a 3/8-inch diameter ring for this. 

Add a layer of metal to each half to make sure the ring stays secure. 

Then, add more metal to the outside of the slit to make holes in the other halves. 

Continue adding metal as you complete the ring and to make things look more professional. 

When the whole ring is complete, you can remove the metal layer to make another ring.

This method makes it much easier to see what you’re working with. 

A good rule of thumb is to make one ring that’s 2.75 inches long, 1.75-inches wide, and 0.25 inches thick. 

After you make your first ring, you’ll want to add a layer. 

There are a lot more rings out there, but these are the basic techniques that I recommend. 

Once you’ve completed your first piece of jewelry, you will want to take a closer look at the rings you’ve made. 

Your rings will look much different than the first one you made, but the basic process is the same. 

That means you’ll be able to see that the ring has the exact dimensions that you wanted. 

Don’t be afraid to ask a craftsperson if they can make a better ring.

I’ll always be happy to answer any questions you have.